EasyManua.ls Logo

NEC Electra Elite IPK II System - Page 1089

NEC Electra Elite IPK II System
1190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electra Elite IPK II Document Revision 4C
Voice Mail Integration (Analog) 2 - 1065
24-02-02 System Options for Transfer – MOH or Ringback on Transferred Calls
Enable (0)/Disable (1) MOH on Transfer. If enabled, a transferred caller hears Music on Hold
while their call rings the destination extension. If disabled, a transferred caller hears ringback
while their call rings the destination extension. For this option to work with voice mail, the
transferred call must be an unscreened transfer.
(default: 0)
24-02-03 System Options for Transfer – Delayed Call Forwarding Time
Set the time (0~64800 seconds) a transferred call waits at a forwarded extension before routing
to the called extension mailbox.
(default: 10)
40-03-01
through
40-03-03 Message Recording Setup
40-07-01 Voice Prompt Language Assignment for VRS
45-01-01 Voice Mail Integration Options – Voice Mail Department Group Number
Assign which Extension (Department) Group number is to be assigned as the voice mail group.
An entry of 0 means no voice mail is installed.
Department Groups: 0, 1~64
(default: 0)
45-01-02 Voice Mail Integration Options – Voice Mail Master Name
Enter the Voice Mail master name (up to 12 characters).
(default: Voice Mail)
45-01-04 Voice Mail Integration Options – Park and Page
Enable (1)/Disable (0) the system ability to process the Voice Mail Park and Page (
)
commands.
(default: 1)
45-01-05 Voice Mail Integration Options – Message Wait
Enable (1)/Disable (0) the system ability to process the Voice Mail Message Wait (#) commands.
You should normally enable this option. If enabled, be sure that the programmed Message
Notification strings do not contain the code #9 for trunk access. When using an external voice
mail and centrex transfer, this option should be disabled or the service code #3 in Program
11-12-42 must be changed.
(default: 1)
45-01-06 Voice Mail Integration Options – Record Alert Tone Interval Time
Set the time (0~64800 seconds) between Voice Mail Conversation Record alerts.
(default: 30)
45-01-14 Voice Mail Integration Options – CCIS Centralized Voice Mail Number
Assign the pilot number (up to eight digits) to Centralized Voice Mail over CCIS Link.
(default: No Setting)

Table of Contents

Related product manuals