Electra Elite IPK II Document Revision 4C
Codes Tables 3 - 33
Code: 38
Operation: Leave
message: Call ext +
Press key OR
Answer message:
Press key
Message Waiting Answer/Leave a
Message Waiting
None 0
or
0
Code: 39
Operation: Press
key at destination
and source + ext
Room Monitor Activate Room Monitor Fast Flash red at
destination, Hold
Flash red at source
-
Code: 40
Operation: Press
key
Handset Cutoff Cut off the handset
transmission while on a call
On when feature
active (no
transmission on
handset)
-
Code: 41 + sec. ext.
Operation: Press
key
Secretary Call Call your secretary (using the
buzzer)
On red at source
Fast Flash red at
destination
-
Code: 42 + boss
ext.
Operation: Press
key
Are a secretary picking up a
call ringing your boss’s
extension.
On red when
activated
-
Code: 43
Operation: TRK call
+ Hold + ext + Press
key
Serial Call Place a Serial Call to a
co-worker
None -
Code: 44
Operation: Place or
answer call + Press
key
Hold Put a call on System Hold (if
hold key is reassigned)
None -
Code: 45
Operation: Place or
answer call + Press
key
Put a call on Exclusive Hold None -
Code: 46
Operation: Press
key
Department Calling Log in or log out of your
Department Calling Group
On when removed,
Off when installed
150
Code: 47 + dest.
ext.
Operation: Press
and hold key
Reverse Voice Over Initiate Reverse Voice Over Full BLF red -
Code: 48
Operation: Hear
Off-Hook Signaling
tones + Press key
Voice Over Initiate or respond to Voice
Over
On red when
responding Hold
Flash red when
listening
790
Table 3-5 Function Key Codes by Number (Continued)
To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
press the key and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you... Key Lamp Status
Also see
Srvc Code
To Next Page
Loading...
Need help?
General
