To Next Page

To Previous Page

Electra Elite IPK II Document Revision 4C

Direct Station Selection (DSS) Console 2 - 357

Central Office Calls, Answering

Central Office Calls, Placing

Door Box

Night Service

One-Touch Calling

Paging, External

Paging, Internal

Programmable Function Keys

Speed Dial – System/Group/Station

Programming

 10-03-01 ETU Setup – ESI Terminal Type (B1)

The system automatically assigns the terminal type (10) for the port which has a DSS console

installed.

 15-02-08 Multiline Telephone Basic Data Setup – Automatic Handsfree

Set to 1 for a DSS Console to have one-touch operation. If set to 0, the user needs to lift the

handset before pressing a DSS key for the call to complete.

 20-06-01 Class of Service for Extensions

Assign Class of Service (1~15) to extensions.

 20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling

(Automatic Override)

Allow a busy extension user to manually (0) or automatically (1) receive off-hook signals.

 20-13-49 Class of Service Options (Supplementary Service) – BLF Indication on CO Incoming State

(Version 1600 or higher required)

Turn Off (0) or On (1) the BLF Indication when a Ring Group call rings a station. This

assignment does not apply to single line telephones.

 20-17-01 Operator Extension – Operator’s Extension Number

Define the extension numbers used as operators.

 30-01-01 DSS Console Operating Mode

Set the system DSS Consoles mode. The available options are Business Mode (0), Hotel Mode

(1), and ACD Monitor Mode (2). Default is 0.

NEC Electra Elite IPK II System User Manual

Questions and Answers: