NEC Electra Elite IPK II System - Page 47

Electra Elite IPK II Document Revision 4C
Account Code – Forced/Verified/Unverified 2 - 23
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also use this procedure for incoming calls. This
procedure is not available for single line telephones.
1. Dial
.
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
#).
 If Account Codes are hidden, each digit you dial shows an  on the telephone display.
3. Dial .
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced Account Codes, you must use this procedure. If it has Verified Account
Codes, you can use this procedure instead of letting the system prompt you for your Account Code. You
may also use this procedure if your system has Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
 Press a line key or dial a code to access a trunk. Refer to Central Office Calls, Placing on page 2-195 for more
information.
2. Dial .
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
3. Dial your Account Code [1~16 digits, using 0~9 and
# or (3~16 digits for Forced)].
 If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,
each digit you dial shows
 on the telephone display (depending on programming).