NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
PC Programming 2 - 795
 IP (LAN) connections are established via the Ethernet connector on the CPUII card.
Figure 2-21 PCPro Connection Dialog Box
Set up the COM port to match
the KTS (PRG 10-21-02 on the
KTS)
IP address of the KTS (PRG
10-12-01 on the KTS)
User Name/Password is taken
from PRG 90-02 on the KTS

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English