Document Revision 4C Electra Elite IPK II
2 - 798 PC Programming
To access the modem over K-CCIS, route the modem access service code to the target
switch. Do not call a station that is call forwarded to the service code. When accessing the
modem over K-CCIS, enter the service code to be dialed in PC Pro.
PC Pro follows the PC dialing properties. If dialing a service code, you must turn off the dial 9 for
outside line and area code inclusion or PC Pro dials these digits as well.
Some program items require second initialization of the KTS before they take effect. These
programs are: 10-12-01, 10-12-02, 10-12-03, 10-12-04, 10-13-01, 10-13-02, 10-13-03,
10-14, 10-15, 10-16-01, 10-16-02, 10-16-03, 10-16-04, 20-01-03, 47-01-01, 80-01,
80-02-01, 80-02-02, 80-02-03, 80-02-04, 80-03, 80-04, 84-03-01, 84-03-02, 84-03-06,
84-03-07, 84-03-08, 84-05-01, 84-05-02, 84-06-01, 84-06-02, 84-06-03, 84-06-04,
84-06-05, 84-06-06, 84-06-07, 84-06-08, 84-06-09, 84-06-10, 84-06-11, 84-09 and 84-10.
Default Setting
None
System Availability
Terminals
Not Applicable
Table 2-30 PC Pro to CPUII Version Comparison Chart
PC Pro Version
1.00 1.10 1.50 2.00 2.10
CPUII Version
1000 X X X X X
1100
–
XXXX
1500
––
XXX
1600
–––
–X
2000
–––
XX
2100
––––
X
X = PC Pro and CPUII Version is compatible
– = PC Pro and CPUII Version is not compatible
To Next Page
Loading...
Need help?
General
