Neopost MACH 5 User Manual

SECTION 3
TOOLBOX SERVICE FEATURES
38
System Settings
Network Settings:
1. Click “System Settings”.
The “Network Configuration”
page opens.
Use “Network Settings” to enter the
correct settings for your network.
2. Connect Ethernet cable to Network
Port on Rear Panel of Printer.
Date and Time – Enter or change the way
the date and time will appear in the Printer
Status section of the Toolbox screens.
Enter or change Date and Time:
1. Open the User Interface page,
click “System Settings.”
2. “System Settings” page opens.
Use Date and Time options to
enter, edit and configure the Date
and Time for the Printer.
3. Click “Submit”.

Neopost MACH 5 Specifications

General

Brand	Neopost
Model	MACH 5
Category	Printer
Language	English