netAlly ETHERSCOPE nXG User Manual

instructions.)
Export the Settings File(s)
This procedure is done on the device from which
you are transferring the settings.
1. In the AutoTest app main page, tap the
settings icon in the top right. This opens
the list of profiles.
2. If you plan to export only selected profiles,
use the checkboxes to choose those profiles
from the list.
3.
Tap on the save icon in the top right to
display the save menu options.
Software Management
151

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing