This setting can prevent the Product from
shutting down ports that sense too many ARPs
being sent.
Refresh Interval
This setting controls the time between runs of
the Discovery process. By default, Discovery runs
every 90 minutes. Tap the Refresh Interval field
to select a different interval, up to 8 hours.
The Manual option turns off regular automatic
Discovery, and the process refreshes only if you
select Refresh Discovery from the main
Discovery list screen.
SNMP Configuration
The MIB (Management Information Base) of
SNMP managed devices contains information
such as device configuration, interface con-
figuration and statistics, SNMP tables (like host
resource and route tables) and VLAN details.
Through the Discovery process, the Product
interrogates MIBs to determine the device type,
ports, connected subnets, and other data.
Discovery App
506
To Next Page
Loading...
