* IntelliTone is a trademark of Fluke Networks.
The last row of WireView results indicates
whether the cable is shielded: an unbroken line
between sh means a shielded cable is detected.
Toning Function
You can also trace a cable using a Fluke
Networks* IntelliTone™ Probe, or any analog
probe, and the Tone function.
Connect a cable into the left side RJ-45 port, and
then tap the floating
action button (FAB) .
Select a Tone
option from the menu.
The EtherScope nXG
Controlled Edition
emits the tone through
the cable, and the
probe detects it,
allowing you to trace
the wire or locate it in the switch closet.
Cable Test App
803
To Next Page
Loading...
