Wi-Fi Analysis and
Discovery
Wi-Fi Analysis uses the Wi-Fi Test Port to scan
the channels and acquire information about
your wireless networks. If the Wi-Fi Test Port is
linked (for instance after running a Wi-Fi
AutoTest Profile), the port unlinks and resumes
scanning when you open the Wi-Fi Analysis app.
Wi-Fi Analysis is enhanced with data gathered by
Discovery. When the Product is linked to a
network through any of the other three ports
(Wi-Fi Management, Wired Test, or Wired
Management), Discovery can obtain information
from network layers 3 and above, such as IP
addresses, Protocols, and SNMPdata.
Therefore, the information Wi-Fi Analysis is able
to display also depends on configured Discovery
Settings, such as SNMP Community Strings and
Credentials, Active Discovery Ports, Extended
Ranges, and Device Health testing.
Wi-Fi Analysis App
532