Running an iPerf Test
Ensure that you have an active link on the
Interface (Test Port) from which you are running
the iPerf test. Wired and Wi-Fi test ports require
that an AutoTest Wired or Wi-Fi Profile has run
to establish a link. The AutoTest Wired Profile
runs automatically, but you must open the
AutoTest app to run a Wi-Fi Profile and link on
the Wi-Fi test port. Management ports link auto-
matically if a connection is available.
Tap the START button on the main iPerf screen
to begin testing.
iPerf Test App
748
To Next Page
Loading...
Need help?
General
