netAlly ETHERSCOPE nXG User Manual

DHCP, DNS,Gateway, or All). The excluded test
cards do not appear on the Profile results
screen.
HTTP Proxy
The Proxy control lets you specify a proxy server
through which the Product establishes a
network connection. In AutoTest, these settings
are used when HTTP Proxy is enabled in an
HTTP or FTP Test Target.
To use the proxy settings with a web browser,
run the Profile, and then, open the web browser
while the unit remains linked.
Open the HTTP Proxy screen to enable proxy
settings.
AutoTest App and Profiles
262

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing