Performance Test
App
The EtherScope nXG Controlled Edition's line
rate Performance Test provides point-to-point
performance testing of a traffic stream across
wired IPv4 network infrastructure. This test
quantifies network performance in terms of
target rate, throughput, loss, latency, and jitter.
The Performance test exchanges a stream of
traffic with Peers or Reflectors and measures the
performance of the traffic stream. You can
simulate real-world traffic by configuring traffic
flow, frame size, VLAN, and QoS options. Run the
test at a full line rate of up to 10Gbps for
performance validation, or run at lower speeds
to minimize disruption when troubleshooting
operational networks.
681
EtherScope nXG CE User Guide
Back to Title and Contents