Running Ping/TCP Tests
Your unit must be connected to an active
network (Test or Management Port) to run Ping
and TCP Connect tests. Icons in the top Status
Bar indicate whether and how your Product is
connected. See Connection Notifications for
descriptions of the connection status icons, and
select the appropriate Interface (or Any Port)
from the Ping/TCP settings.
The default target is google.com. Open the app
settings to enter a new target.
To begin the test, tap START.
If the Number of Tests setting is set to
Continuous, the Ping/TCP app runs tests to your
selected target until you tap STOP.
Ping/TCP Test App
396