netAlly ETHERSCOPE nXG User Manual

VLAN Settings
Tap to open the VLAN settings screen. Slide the
toggle to the right to enable VLAN testing.
Enabling this setting also enables a VLAN test
card on the Wired AutoTest results screen. Once
enabled, VLAN ID and VLAN Priority fields
appear. Tap these fields to open a pop-up
number pad and enter the correct ID and
priority. Tap OK to save them.
AutoTest App and Profiles
259

netAlly ETHERSCOPE nXG Specifications

General

Brand	netAlly
Model	ETHERSCOPE nXG
Category	Test Equipment
Language	English