netAlly ETHERSCOPE nXG User Manual

Connecting to Wi-Fi
Basic connectivity to Wi-Fi is done using the Wi-
Fi Management Port, which is configured in the
system network settings. The Wi-Fi Management
Port is separate from the Wi-Fi test ports. It can
access the internet, be used by other system
applications, upload test results to the Link-Live
web site, and be used for remote control. The
management port also provides a more stable
network connection than the test port, which
can change connections during AutoTests or be
disconnected during Wi-Fi scanning. See Test
and Management Ports for more information.
NOTE: NetAlly testing apps use the Wi-Fi Test
Ports and Wi-Fi AutoTest Profiles to connect
to Wi-Fi networks during testing. See Test
and Management Ports for more information.
To connect your Product to a Wi-Fi network,
access the system Wi-Fi Device Settings using
either method below:
l
Open the device Wi-Fi settings from the main
Device Settings screen by tapping the
Settings icon and selecting Network &
Home and System Interface
55

netAlly ETHERSCOPE nXG Specifications

General

Brand	netAlly
Model	ETHERSCOPE nXG
Category	Test Equipment
Language	English