The table on the lower part of the VLAN screen
lists all the VLANs seen.
Switch Test Results
The results available for the Switch Test are
based on Discovery Protocol advertisements and
SNMP system group information. SNMP
forwarding table data is used to determine the
Nearest Switch. See Discovery Settings for SNMP
configuration instructions.
The Switch test card displays the Nearest Switch
and the port name. The Switch icon remains
black if the test is successful.
l
If the Product does not detect any network
traffic moving through the switch after 45
seconds, the switch icon turns yellow.
AutoTest App and Profiles
237
To Next Page
Loading...
Need help?
General
