Back to Title and Contents
When running a UDP protocol test, the iPerf
app attempts to run at the selected
Bandwidth.
Direction: You can run an iPerf test Upstream,
Downstream, or both. The default is Upstream
and Downstream. Tap this field to set the test
for only one direction.
Upstream and Downstream Bandwidth: These
fields only appear if the UDP Protocol is
selected. They specify the desired target
bandwidth for the iPerf Test using the UDP
protocol.
Upstream and Downstream Thresholds:
Thresholds are the values the Product uses to
grade the test as Pass or Fail. iPerf thresholds
are throughput rates. The default is 10 Mbps.
Tap the threshold fields to select a different
value or enter a custom one.
iPerf Test App
747