netAlly ETHERSCOPE nXG User Manual

6. Tap Export To Link-Live. This uploads the
file to Link-Live.
Use Link-Live to Select Other Devices
This procedure is best performed on a PC-based
browser.
1. Use a PC-based browser to log in to the
Link-Live web site.
2.
Click the main menu icon .
3. Click on Settings to open the settings menu.
4. Select EtherScope nXG Controlled Edition
to list the .o settings files available for your
devices.
5. Select the settings file you want to transfer.
6. Follow the screen instructions to transfer
the file to specific units or to all units that
you have claimed.
Use Each Selected Unit to Import the
Settings
This procedure is performed on the device to
which you want to apply the settings.
Software Management
154

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing