netAlly ETHERSCOPE nXG User Manual

You can perform these actions on the AutoTest
Settings screen:
l
Check or uncheck the boxes to include or
exclude a test Profile from the currently
active Profile Group.
l
Tap the up and down arrows to
reorder the test Profiles on this and the main
AutoTest screen for the Profile Group.
l
Tap the action overflow icon to Duplicate
or Delete a Profile.
CAUTION: When you delete a Profile, it is
deleted from all Profile Groups. To remove a
Profile from the current group, simply
uncheck it.
l
Tap any Profile's name to open the test and
connection settings for the Profile.
l
Tap the save icon to perform the
following actions:
o
Load: Open a previously saved settings
configuration, which includes the Profile
Group.
AutoTest App and Profiles
202

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing