Received Class: Class acknowledgment
received from the switch
TruePower™ Power: Measured wattage with
load.
NOTE: The PoE card displays additional
TruePower™ results only if TruePower is
enabled in the Wired Profile PoE Settings.
Voltage
Unloaded: Measured voltage without load
TruePower™ Voltage: Measured voltage with
load
Positive: Positive PoE cable pair IDs
Negative: Negative PoE cable pair IDs
PSE Type: Switch's advertised Power
Sourcing Equipment (PSE) type. Recognized
types are 1 – 4, LTPoE++, Cisco UPOE, and
PoE Injectors. PSE supporting UPOE are clas-
sified under Type 2. If the type cannot be
determined, "1/2" is displayed.
Negotiation: Negotiation status for UPOE
and Class 4 (UPOE or LLDP)
AutoTest App and Profiles
225
To Next Page
Loading...
