The switch results screen shows the following
data fields:
Status: Time elapsed after link was established
before network traffic was received from the
switch. The MAC address of the device that sent
the packet is also shown.
Nearest Switch: Name of the switch determined
to be closest to the Product
Port: Detected Port name
Description: Configured description reported
by the switch
VLAN ID: VLAN ID number (if present)
Voice VLAN ID: Voice VLAN ID number (if
present)
IP and MAC Addresses: Discovered switch
addresses
Location: Configured location reported by
the switch. This field only appears if the
Product has SNMP access to the Nearest
Switch.
Contact: Configured contact person reported
by the switch. This field only appears if the
AutoTest App and Profiles
240
To Next Page
Loading...
Need help?
General
