Roams: Number of times the unit has dis-
connected from the previous AP and
connected to a different AP with a better
signal strength. This behavior is partly con-
trolled by the Roam Threshold in the Wi-Fi
Connection settings.
AP: Name, IP, or MAC address of the AP to which
the Tester is connected, depending on the
information Product can see about the AP. This
field shows the custom User Name if one has
been entered. See Assigning a Name and Author-
ization to a Device in the Wi-Fi app chapter.
BSSID: BSSID of the access point
Channel: Channel number on which the AP is
operating
Roam Scans: Number of times the Product
has scanned for a new AP supporting the
same SSID. Multiple triggers may cause
Product to scan for another AP, such as low
signal strength or high retry rate.
Last Roam From: If the Product has roamed to a
new AP, the previous AP's name, BSSID, and
Channel display.
AutoTest App and Profiles
273
To Next Page
Loading...
Need help?
General
