netAlly ETHERSCOPE nXG

created a "Connect to [SSID]" profile from the
Wi-Fi app, the Authentication type is auto-
matically selected. If needed, tap to open the
Authentication dialog and select the correct
security type for the network.
The following settings depend on the Authentic-
ation type. Enter all necessary credentials for the
network security type, such as Encryption, Keys,
EAP type, username, certificate, and/or
password.
WEP Key
This setting appears if the Authentication type is
WEP Shared or WEP Auto. Tap to select the
correct key type (ASCII or Hex) and enter the
key.
Encryption
Tap to select an encryption type if needed. The
default is "Auto."
EAP Type
This setting appears if theAuthentication type is
WPA/WPA2/WPA3 Enterprise. The default is
AutoTest App and Profiles
296