Name: This field allows you to assign a custom
name to the test. The name appears on the
target test card in the profile.
Device Name: Enter the IP address or URL of the
target you want to test. If you enter an IP
address, the DNS lookup portion of the test is
skipped.
IP Protocol Version: IPv4 is used by default. Tap
the field to switch between IPv4 and IPv6.
Port: Specify the TCP port number for the
Product to use to connect to the target.
Timeout Threshold: This threshold controls how
long the Product waits for a response from the
target before failing the test.
TCP Connect Test Results
The TCP card shows the test name entered in
the settings and the three response times from
the target.
Tap the card to open the TCP results screen.
AutoTest App and Profiles
351
To Next Page
Loading...
Need help?
General
