Utilization setting is enabled in General
Settings, the graph shows only combined
802.11 and non-802.11 Utilization.
l
Yellow bars next to the blue bars show the
percentage of retries.
l
Channel numbers are listed on the x-axis and
utilization percentage on the y-axis.
l
AP counts for the APs' primary channel are
shown in dark red at the top of the column
for each channel. In the example below,
Channel 161 has 7 APs. (Channels that do not
have APs can still show 802.11 utilization
because of overlap from adjacent channels.)
l
Client counts for the channel are shownnear
the top of the column for each channel. In
the example below, Channel 161 has 15
clients.
l
Tap a Channel's column on the Map or Map
6E graph to select and highlight the channel.
This displays the CHANNEL DETAILS and
SPECTRUM links at the bottom of the screen.
In the example below, Channel 161 is
Wi-Fi Analysis App
572
To Next Page
Loading...
Need help?
General
