You can Filter and Sort the list to
determine which SSIDs are shown and their
order. Refer to the Wi-Fi App List Screens topic if
needed.
By default, SSIDs are ordered by Signal strength,
and each card shows the network security status
and number of APs on the network.
The security status icons have the following
meanings:
l
Green closed lock: All APs on the network
use secure protocols, like WPA2 or WPA3.
l
Yellow closed lock: One or more APs use
WEP or Cisco LEAP protocols, which are less
secure.
l
Red open lock: The network does not
have security enabled.
Tap a SSID card to open the SSID Details screen.
Wi-Fi Analysis App
585
To Next Page
Loading...
Need help?
General
