netAlly ETHERSCOPE nXG User Manual

l
Test Wi-Fi Management Using WPA2-E with
PEAP
l
Import the Client Certificate
Before You Begin
You may depend on your IT department to
provide authorization certificates, which may be
created by a Trusted Root Authority like VeriSign
or DigiCert. If so, contact your ITdepartment for
the certificate resources. You will need:
l
CAcertificate in .pem format
l
Client certificate in .p12 format with private
key (EAP TLS only)
l
Common name, domain name, username,
and password for the server you to which
you want to connect.
If you have the ability to generate your own self-
signed certificates, such as a FreeRADIUSserver,
you can create these resources as needed. This
procedure uses examples generated by a
FreeRADIUSserver as a certificate source,
although other sources are available.
Home and System Interface
60

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing