You can Filter and Sort the list to
determine which Clients are shown and their
order. Refer to the Wi-Fi App List Screens topic if
needed.
By default, the Clients are ordered by Signal
strength, and each card shows the client's Signal
strength in dBm, the SSID of the network to
which the client is connected, and the channel
number on which the Client is operating.
The general Client icons indicate whether the
device is Probing or Connected to a
network and able to receive data. If a Client is
probing, two dashes -- display where the SSID
would appear.
The Clients screen also shows specific icons for
NetAlly testers, like the Product icon shown in
the image above.
Tap a Client's card to open the Details screen.
Wi-Fi Analysis App
606