The u key enters a user-defined size into the mix.
Select the field next to User Size: to enter your
desired frame size, between 64 and 9600 bytes.
Tap the u key to insert the new size where you
want it in the pattern.
NOTE: If the Performance Test runs on a
VLAN (configured in the Wired AutoTest
Profile or the Performance Layer 2 options
shown below), the frame sizes are four bytes
longer. You do not need to account for this
frame size increase in the settings.
Bandwidth
Tap to open the Bandwidth screen and select or
enter a Target Rate for one or both traffic
directions.
Performance Test App
700
To Next Page
Loading...
