Back to Title and Contents
DSCP: This field is only available when TOS with
DSCP is selected in the setting above. Using the
DSCP control, you can specify a priority for the
generated traffic by changing its classification.
This is a six-bit field. The default value of zero
specifies “Best Effort.” Tap the field to select a
different DSCP.
IP Precedence: This field is only available when
TOS with IP Precedence is selected. Tap the
field to select an IP Precedence other than the
default of Routine (0).
IP Precedence Type: This field is also only
available when TOS with IP Precedence is
selected. Tap the field to select an IP
Precedence Type other than the default of
Normal (0).
Validate QoS: When this setting enabled, the
Product checks received packets to ensure that
the QoS field has been maintained throughout
the route. If the QoS field has been altered,
packets are counted as lost.
Performance Test App
708
To Next Page
Loading...
Need help?
General
