netAlly ETHERSCOPE nXG User Manual

2. With the unit powered on, tap the TOOLS
icon on the Home screen.
3. In the TOOLS menu, select Testing Tools >
Performance Peer.
4. Select the appropriate UDP Port number if
other than the default of 3842.
NOTE: The port number set on your
endpoint must match the port number used
by your source Product.
5. Turn on Enable AutoStart to cause the Per-
formance Peer function to start auto-
matically when the OneTouch is powered
on.
6. Tap the START button.
The PERFORMANCE PEER screen appears,
and a network link is automatically
established.
7. The IPv4 address of the peer is displayed on
the screen. Enter this address on the
Endpoint Device screen in the EtherScope
nXG Controlled Edition's Performance test
Services settings.
Performance Test App
711

netAlly ETHERSCOPE nXG Specifications

General

Brand	netAlly
Model	ETHERSCOPE nXG
Category	Test Equipment
Language	English