Performance results update every five seconds if
you are using only Reflector endpoints, and/or
an EtherScope nXG Controlled Edition Peer
running v1.2 or newer software, with a test
Duration of 4 hours or less. If you are running a
10 second test, all results display after 10
seconds. Otherwise, results update every 30
seconds.
Performance Test results are presented on
cards. The top card shows the test duration and
status.
Duration: The test duration selected in the
Performance Settings
Started: Time at which the test began
Status: Current status of the test, including any
error messages
Each card beneath corresponds to a configured
Service and displays the Up, Down, or Round
Trip measurements for Throughput, Loss,
Latency, and Jitter. Remember, Peer endpoints
can return Upstream and Downstream meas-
urements, while Reflectors only provide round
trip measurements.
Tap a Service card to view more details.
Performance Test App
720
To Next Page
Loading...
Need help?
General
