Tap each field to enter or revise selections as
needed. Changed settings are automatically
applied. When you finish configuring, tap the
back button to return to the iPerf test screen.
Interface: This setting specifies which Product
port runs the scan. (See Selecting Ports for
explanations of the different ports.)
IPv4 Address: Tap the field to enter or select the
IPv4 address of the target iPerf server. Only IPv4
addresses are allowed for iPerf testing.
A drop-down list in the IPv4 Address dialog
shows all the Test Accessories the Product has
discovered through the discovery process, as
iPerf Test App
745
To Next Page
Loading...
