netAlly ETHERSCOPE nXG

l
SFP details are shown when using a fiber
connection. These include:
o
Wavelength
o
Temperature
o
Voltage
o
Tx Bias Current
o
Tx Power
o
Rx Power
o
Rx Reference Power
o
Rx Power Difference
o
SET REFERENCE button (displayed only
while test is running):Latches the Rx
Reference Power value to the current Rx
Power value.
o
CLEAR REFERENCE button (displayed
only while test is running): Clears the Rx
Reference Power value.
NOTE:The LANBERT generator and
LANBERT Loopback both use the
same reference power value. This
LANBERT™ Test App
767