2.Tap the Wi-Fi band(s) option to open a
selection screen, and then enable all available
bands.
3. Tap the option for each frequency band to
open a selection screen, and then enable all
available channels for each band.
This process makes it easier to set up the Wi-Fi
Test Profiles, which you can limit to specific
channels, APs, SSIDs, etc. See AutoTest Wi-Fi
Profile for more information.
See General Settings for more information about
all General Settings options.
Management Ports
Wi-Fi Management Port: The internal Wi-Fi
management port runs on the main system's 1x1
Dual-band 802.11ac + Bluetooth 5.0 wireless
adapter, which is configured in the system
Device Settings. See "Connecting to Wi-Fi" on
page55 to configure this connection.
Wired Management Port: The wired
management port is the RJ-45 port on the left
side of the unit.
General Settings and Tools
86
To Next Page
Loading...
Need help?
General
