Newport ESP300 Series User Manual

SET HOME VEL
Sets the velocity used during homing sequences. Refer to Section
1.6.3 for details on homing.
OH - Set home velocity
SET ACCEL/DECEL
This menu makes it possible to change acceleration and deceleration
that are used with the jog and home search buttons. The following
sub-menus are available:
SET ACCELERATION
Sets the acceleration that is used to accelerate to the desired velocity
when the jog buttons are used.
AC - Set Acceleration
SET DECELERATION
Sets the deceleration that is used to decelerate to the standstill when
the jog buttons are released.
AG - Set Deceleration
SET JOG MODE
Sets the mode used when either jog button is pressed. There are two
modes:
RUN
In this mode, the stage moves as long as either jog button is pressed.
INCR value
In this mode, the stage moves an incremental distance determined by
value when either jog button is pressed.
PR - Move Relative
Section 2 – Modes of Operation 2-7

Newport ESP300 Series Specifications

General

Brand	Newport
Model	ESP300 Series
Category	Controller
Language	English