Nikon D780 - Page 717

671
Menu Guide >
B
The Setup Menu
4
Press
J
.
•
The AF fine-tuning value for the current lens will be added
to the [List saved values] list (CPU lenses only).
•
If auto fine-tuning is successful, AF fine-tuning will be
enabled and the [AF fine-tune on/off] item will change to
[On].
•
If you are using a zoom lens, after completing AF fine-
tuning for either the maximum angle or maximum zoom,
you will need to repeat the process for the remaining item.
Press the
X
(
T
) button and repeat Steps 2 to 4.
•
New values overwrite existing values.
5
Press
J
to save changes and exit.
D
If Auto Fine-Tuning Fails
If auto fine-tuning fails, a message will be displayed. Press
X
(
T
) to
attempt auto fine-tuning again, or press
J
to exit without performing AF
fine-tuning. Pressing
X
(
T
) returns you to Step 2.