7705 SAR Interfaces
798
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.1.8 Show LAG Commands
lag
Syntax lag [lag-id] [detail] [statistics]
lag lag-id associations
lag [lag-id] description
lag lag-id [detail] lacp-partner
lag [lag-id] port
Context show
Description This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters lag-id — displays information only on the specified LAG
Values 1 to 32
detail — displays detailed LAG information
Default displays summary LAG information
statistics — displays LAG statistics information
associations — displays a list of current router interfaces to which the LAG is associated
description — displays a list of all LAGs and LAG ports and their descriptions
lacp-partner — displays information about the LACP partner (detail keyword provides
detailed information)
port — displays information about the specified LAG port or all LAG ports
Output The following outputs are examples of LAG information:
•Summary (Output Example, Table 101)
• Detail (Output Example, Table 102)
• Statistics (Output Example, Table 103)
• Associations (Output Example, Table 104)
• Description (Output Example, Table 105)
• LACP partner (Output Example, Table 106)
• LACP partner (detail) (Output Example, Table 107)
•Port (Output Example
, Table 108)