ACCESS GATEWAY
162 System Administration
Adding a Subscriber Type Profile
1. From the Web Management Interface, click on Subscriber Administration, then Add.
The Add a Subscriber Profile to the Database screen appears:
2. Choose the Subscriber account type.
3. Define the DHCP Address Type: Public or Private (only used when the IP Upsell feature
is enabled, otherwise leave this set to “private”).
4. Enter a valid MAC Address for the subscriber.
If you have chosen to manage this subscriber by user name only, you do not need to enter a
MAC address (but you must enter a user name).
5. Enter the IP Address of the subscriber.
6. Enter a valid Subnet address for this subscriber.
To Next Page
Loading...
