ACCESS GATEWAY
246 Quick Reference Guide
ICMP Sets up ICMP blocking for traffic from “pending” or “non authenticated”
users that are destined to addresses other than those defined in the pass-
through (walled garden) list.
Import Imports previously exported system configuration settings from an archive
file.
Login Sets up the login name and password.
Mac Filtering Blocks malicious users based on their MAC address. Up to 50 MAC
addresses can be blocked at any one time.
Reboot Reboots the Nomadix Access Gateway.
Route Add Adds a route into the Nomadix Access Gateway’s routing table.
Route Delete Deletes a route to a specific IP destination.
Session Limit Limits the number sessions any one user can take over a given time period
and, if necessary, then blocks malicious users.
Static Port-
Mapping Add
Sets up static port-mapping schemes.
Static Port-
Mapping Delete
Deletes static port-mapping schemes.
Subscriber
Interfaces
Blocks subscriber interfaces.
Upgrade Obtain the latest Firmware Upgrade Procedure from Nomadix Technical
Support.
Items Description
ARP Add Adds an Address Resolution Protocol (ARP) table entry.
ARP Delete Deletes an ARP table entry.
Bridge Mode Enables the Bridge Mode option.
Export Exports the system’s configuration settings to an archive file.
Factory Imports the factory default settings.
Items Description
To Next Page
Loading...
