ACCESS GATEWAY
Quick Reference Guide 247
FailOver Sets up a “sibling” Nomadix Gateway, allowing one device to
take up the users should the other device become
disconnected from the network.
History Displays a history log of the system’s activity, including Access,
Reboot and Uptime.
ICMP Sets up ICMP blocking for traffic from “pending” or “non
authenticated” users that are destined to addresses other than
those defined in the pass-through (walled garden) list.
Import Imports previously exported system configuration settings from
an archive file.
Login Sets up the login name and password.
Mac Filtering Blocks malicious users based on their MAC address. Up to 50
MAC addresses can be blocked at any one time.
Reboot Reboots the Access Gateway.
Route Add Adds a route into the Access Gateway’s routing table.
Route Delete Deletes a route to a specific IP destination.
Session Limit Limits the number sessions any one user can take over a given
time period and, if necessary, then blocks malicious users.
Static Port-Mapping Add Sets up static port-mapping schemes.
Static Port-Mapping Delete Deletes static port-mapping schemes.
Subscriber Interfaces Blocks subscriber interfaces.
Syslog Displays syslog history.
System Utilization Displays system utilization information.
Upgrade Obtain the latest Firmware Upgrade Procedure from Nomadix
Technical Support.
User Settings Blocks IPPROTO traffic from misconfigured subscribers.
Items Description
To Next Page
Loading...
