NTI ENVIROMUX Series User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
133
SMTP Error Codes:
Without
SSL
enabled:
Meaning Comments
-1 SMTP_CONN_ERR, Cannot establish a connection to the SMTP server. Possible
reasons: bad setting for IP of SMTP server, firewall blocking the
connection
-4 SMTP_SERVER_NOT_READY_ERR, Server denied connection
-5 SMTP_EHLO_ERR, Server did not answer to HELO command
-6 SMTP_AUTH_NO_SUPPORT_ERR, Authentication method is not supported
-7 SMTP_AUTH_FAILURE_ERR, Authentication failure (user or password rejected)
-8 SMTP_BAD_FROM_ERR, SMTP Server did not accept the sender e-mail address
-9 SMTP_BAD_TO_ERR, SMTP Server did not accept the destination e-mail address
-10 SMTP_DATA_ERR, SMTP Server did not accept the DATA command
-11 SMTP_BAD_DATA_ERR, SMTP Server did not accept the body of e-mail message
With
SSL
enabled:
-100 SMTP_SSL_CONN_ERR, Failed to resolve connection to DNS server
-99 SMTP_SSL_CONN_ERR1, Cannot establish a connection to the SMTP server. Possible
reasons: bad setting for IP of SMTP server, firewall blocking the
connection
-98 SMTP_SSL_CONN_ERR2, System failed to create a socket (this is for internal reasons - like
network down (a highly unlikely occurrence))
-97 SMTP_SSL_PROTOCOL_ERR, SMTP server connected but did not accept SSL connection
-95 SMTP_SSL_SERVER_NOT_READY_ERR, Server denied connection
-94 SMTP_SSL_EHLO_ERR, Server did not answer to HELO command
-93 SMTP_SSL_AUTH_NO_SUPPORT_ERR, Authentication method is not supported
-92 SMTP_SSL_AUTH_FAILURE_ERR, Authentication failure (user or password rejected)
-91 SMTP_SSL_BAD_FROM_ERR, SMTP Server did not accept the sender e-mail address
-90 SMTP_SSL_BAD_TO_ERR, SMTP Server did not accept the destination e-mail address
-89 SMTP_SSL_DATA_ERR, SMTP Server did not accept the DATA command
-88 SMTP_SSL_BAD_DATA_ERR,
-SMTP Server did not accept the body of e-mail message
-Invalid e-mail address in configuration
-87 SMTP_TLS_ERROR, Cannot connect through STARTTLS protocol. SMTP server
probably does not support this protocol. Disable STARTTLS.
Communication Ports used by the ENVIROMUX:
Port Number Purpose
80 HTTP (also IP sensor monitoring)
443 HTTPS
22 SSH
23 Telnet
161 SNMP (system config, sensor data and mgmt. software sensor data)
162 SNMP (traps)
502 MODBUS (default)
514 SYSLOG
5908 Sensor info for Management Software
5919 Cascading via Ethernet
6000 Management Software

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS