PCM_IAHB_BE2 field descriptions (continued)
Field Description
31
BWE_DMA_A
Burst Write Enable eDMA_A
This bit controls the bus gasket’s handling of burst write transactions.
0 Burst writes are converted into a series of single transactions on the slave side of the gasket.
1 Burst writes are optimized for best system performance. Note this setting treats writes as “imprecise”
such that an error response on any beat of the burst is reported on the last beat.
PCM memory map and register descriptions
MPC5777C Reference Manual Addendum, Rev. 1, 12/2015
18 Freescale Semiconductor, Inc.
To Next Page
Loading...
Need help?
General
