OHAUS Explorer EX423N/E - Dynamic Weighing - Semi-Auto

EXPLORER BALANCES EN-49
Dynamic Weighing Application Setups (defaults in Bold)
Item
Available Settings
Comments
Enabled
On, Off
Turns Application on/off
Auto Sample Mode
Manual,
Semi Automatic
Automatic
To select the Mode
Statistics
Off, Manual, Auto
Lock Settings
On, Off
Press to lock the current setting(s)
so they cannot be changed.
Reference fields
Averaging Time
On, Off
Time in Seconds
Gross
On, Off
Gross weight is displayed
Net
On, Off
Net weight is displayed
Tare
On, Off
Tare weight is displayed
Print Options
See Printing Section.
Averaging Time
On, Off
Auto Print
On, Off
To print automatically after
weighing process is finished.
4.5.3 Dynamic Weighing – Semi-Auto
The cycle begins when an object (animal) is placed on the pan, but the held value must be reset manually.
To enable this feature, touch the Setup Icon (wrench) in the
top-center of the main screen to enter the
Dynamic Weighing Setup menu.
Change the mode to Semi Automatic.
The Dynamic – Semi-Automatic screen appears with the
default (or last) Averaging Time displayed.
Place specimen
on the Pan. The
cycle starts
automatically.
After the cycle
ends, the weight
reading is held.
Press the
Reset
button to clear the
reading and return
to zero.
w ww . . co m
information@itm.com1.800.561.8187