OHAUS Explorer EX423N/E - Application Setup

EN-70 EXPLORER BALANCES
4.10.2 Application Setup
The Application can be customized for various user preferences.
Touch the
Setup
Icon
(wrench) to
enter
Application
Setup from the
home screen.
The
Setup Menu
appears.
Select the list item to view or change the setting as
desired.
To return to the Application home screen, touch
Done
.
The Density Application Setups (defaults in Bold)
Item
Available Settings
Comments
Enabled
On, Off
Turns Application on/off
Density Type
Solid, Liquid
To select either solid or liquid
Liquid Type
Water, Other
Liquid used during measurements
Porous Material
On, Off
To select Porous material
Auto Print Result
On, Off
To automatically print results
Auto Sample Mode
On, Off
To select the mode
Reference fields
Liquid Density
On, Off
Test liquid’s density is displayed
Water Temperature
On, Off
The water temp is displayed
Oil density
On, Off
The test oil’s density is displayed
Weight in Air
On, Off
The sample weight is displayed
Oiled Weight
On, Off
The sample weight is displayed
Weight in Liquid
On, Off
The sample weight is displayed
Sinker volume
On, Off
Displays volume of the Sinker
Print Options
See Printing Section.
Porous Material
On, Off
Liquid Type
On, Off
Liquid Density
On, Off
Water Temperature
On, Off
Weight in Air
On, Off
Weight in Liquid
On, Off
w ww . . co m
information@itm.com1.800.561.8187