OHAUS Explorer EX423N/E - Application Setup; Statistics

EXPLORER BALANCES EN-95
4.15.3 Application Setup
The Application can be customized for various user preferences.
Touch the Setup Icon (wrench) to enter Application Setup from
the home screen.
The Setup Menu is now displayed.
Select the list item to view or change the setting as desired.
To return to the Application home screen, touch
Done
.
When Auto Tare is enabled, the sample will be tared
automatically after Accept is pressed and the sample weight is
stored.
The Fill Weight Variation Application Setups (defaults in Bold)
Item
Available Settings
Comments
Enabled
On, Off
Turns Application on/off
RFID
On, Off
Enable to scan RFID code
Lock Settings
On, Off
Press to lock the current setting(s) so they
cannot be changed.
Reference
Difference Weight
On, Off
Weight difference is displayed
Difference Percent
On, Off
Weight difference percentage is displayed
Average
On, Off
Weight average is displayed
+/- Limit %
On, Off
+/- Limit value is displayed
Gross
On, Off
Gross weight is displayed
Net
On, Off
Net weight is displayed
Tare
On, Off
Tare weight is displayed
Print Options
Average
On, Off
+/- Limit %
On, Off
4.16 Statistics
Statistics are used to compare a number of samples and examine the relative deviation of the samples along with
other statistical data. A minimum of three samples is required.
Statistics can operate manually (key press after each step) or automatically (weights automatically recorded
when stable). To use the statistics feature, enable it in the Application Setup menu.
This feature is available in Weighing, Counting, Check Weighing, Dynamic Weighing and Filling applications.
w ww . . co m
information@itm.com1.800.561.8187