45762101TH Rev.1
2-9
2. TROUBLESHOOTING PROCEDURES
No. Category
PJL
Status
Code
Error Warning Description
38 Normal -
1
2
3
4
5
<ScanToPrint AP>
Scan Pages sss
Print Pages ppp
Copy aa/bb
----------
It cannot confirm this message
from a status key.
Indicates that it is copying.
sss: the number of current
scanning page.
ppp: the number of current
printing page.
aa: the number of current
printing.
bb: the total number of
printing.
The unit of "Scanned pages"
is "Impression".
For example, in duplex
scanning, "Scanned pages"
counter is increased +1 at the
front side of sheet scanning
started, and the counter is
increased +1 at the back side
scanning started.
The unit of "Print pages" is
"Impression".
In simplex printing, "Print
page" counter is increased by
1 when the paper exited from
fuser.
In duplex printing, "Print
page" counter is increased
by 2 when the paper exited
from fuser (after the back side
printed out).
39 Normal - 1
2
3
4
5
<Copy Screen>
Please set next document.
------------------------------
<Scan To, Fax Sending Screen>
Please set next document.
This screen is displayed
at the time of the scanning
completed in Job Build = ON.
40 Normal 10861 1
2
3
4
5
Cancelling ... Indicates that the scanning for
Scan To is cancelling by the
pressing Stop key.
No. Category
PJL
Status
Code
Error Warning Description
41 Normal 10859 1
2
3
4
5
Data writing to USB Memory. Indicates that it is wrighting
the image file to USB memory
after the scanning completed.
The cancel operation by
STOP key pressing is
unsupported during the
writing to USB memory.
42 Normal 10797 1
2
3
4
5
Connecting to PC ... Indicates that it is connecting
to PC.
This message will be
displayed at Start key pressed
after the orignal document
set.
43 Normal - 1
2
3
4
5
Telephone Indicates that tha fax
receiving started.
44 Normal - 1
2
3
4
5
Fax receiving ...
Page: %RXPAGE%
========
[F-code PollingRX]
Fax receiving ...
Page: %RXPAGE%
%RXFAXNUMBER%
Indicates that it is receiving
fax data.
%RXPAGE% : number of the
current receiving page
%RXFAXNUMBER% :
sender Fax no.
(※F
-code
PollingRX only
)
In the case that the F-code
PollingRX is done by using
speed dial, display field is the
following...
A dial number is displayed
during dialing
An entry name is displayed
in fax no. field during fax
receiving.