3-8 Service Manual
4. Select Top Margin, and press Select ().
5. Select the best choice for fine or coarse adjustment in Step 1 (first page), and add it to the current value for
the Top Margin.
6. Use or to enter the sum of the numbers, and press Select ().
Submitting changes… appears.
Print the Quick Test again to verify the observed value is the same as the current value (no change is
needed). If change is still needed, repeat the steps 4–6. When the observed values and the current value
are the same, continue to the next step.
Y112730-2
To Next Page
Loading...
Need help?
General
